Made by S

Highly modified forceps with elongated, parallel tips which are highly polished.

Designed for controlled intraluminal vessel dilation.

11 cm long flat handle,

9 mm wide,

Angled at 10°,

Tip diameter 0.2 mm

No. 00125-11 origine catalogue FST

13.5 cm long, flat handle, 9 mm wide, Straight, tip diameter 0.3 mm with tying platform No. 00272-13 origine catalogue FST

Vessel size range (mm) : 1.5 - 3.5 No. 00325-HD origine catalogue FST

Clamp size and clamp pressure

When choosing the right size clamp for your work, clamp pressure is an important consideration. Clamp pressure is determined by the closing force of the clamp (in grams), divided by the area of the vessel wall that is compressed between the jaws (in square millimeters). Thus, the smaller the vessel, the higher the pressure exerted.

Each size of clamp has its own different and carefully calibrated closing force. Each clamp size is designed for a specific range of vessel diameters (Fig. 1).

Despite the wide range of closing forces, the pressure exerted by each clamp, big or small, remains consistent throughout the series. Each size of clamp exerts a pressure of 5gm/mm2 when used on the largest vessel in its range, and 15gm/mm2 when used on the smallest vessel. Even at the higher range, S

Single use microvascular clampsOne time use clamps when stainless steel is not desirable in experiment. Spring does have steel pivot, so MRI use is limited. Distortion in MRI when used immediately next to image. Package of six. 1.2 cm total length No. 00333-01 origine catalogue FST

One time use clamps when stainless steel is not desirable in experiment. Spring does have steel pivot, so MRI use is limited. Distortion in MRI when used immediately next to image. Package of six. 1.5 cm total length No. 00333-02 origine catalogue FST

One time use clamps when stainless steel is not desirable in experiment. Spring does have steel pivot, so MRI use is limited. Distortion in MRI when used immediately next to image. Package of six. 1.7 cm total length No. 00333-03 origine catalogue FST

Vessel size range (mm) : 0.4 - 1.0 No. 00396-01 origine catalogue FST

Clamp size and clamp pressure

When choosing the right size clamp for your work, clamp pressure is an important consideration. Clamp pressure is determined by the closing force of the clamp (in grams), divided by the area of the vessel wall that is compressed between the jaws (in square millimeters). Thus, the smaller the vessel, the higher the pressure exerted.

Each size of clamp has its own different and carefully calibrated closing force. Each clamp size is designed for a specific range of vessel diameters (Fig. 1).

Despite the wide range of closing forces, the pressure exerted by each clamp, big or small, remains consistent throughout the series. Each size of clamp exerts a pressure of 5gm/mm2 when used on the largest vessel in its range, and 15gm/mm2 when used on the smallest vessel. Even at the higher range, S

Vessel size range (mm) :0.6 - 1.5 No. 00398-02 origine catalogue FST

Clamp size and clamp pressure

When choosing the right size clamp for your work, clamp pressure is an important consideration. Clamp pressure is determined by the closing force of the clamp (in grams), divided by the area of the vessel wall that is compressed between the jaws (in square millimeters). Thus, the smaller the vessel, the higher the pressure exerted.

Each size of clamp has its own different and carefully calibrated closing force. Each clamp size is designed for a specific range of vessel diameters (Fig. 1).

Despite the wide range of closing forces, the pressure exerted by each clamp, big or small, remains consistent throughout the series. Each size of clamp exerts a pressure of 5gm/mm2 when used on the largest vessel in its range, and 15gm/mm2 when used on the smallest vessel. Even at the higher range, S

Vessel size range (mm) : 1.0 - 2.25 A in the catalog number indicates a clamp for thick-walled arteries. No. 00401-03 origine catalogue FST

Clamp size and clamp pressure

When choosing the right size clamp for your work, clamp pressure is an important consideration. Clamp pressure is determined by the closing force of the clamp (in grams), divided by the area of the vessel wall that is compressed between the jaws (in square millimeters). Thus, the smaller the vessel, the higher the pressure exerted.

Each size of clamp has its own different and carefully calibrated closing force. Each clamp size is designed for a specific range of vessel diameters (Fig. 1).

Despite the wide range of closing forces, the pressure exerted by each clamp, big or small, remains consistent throughout the series. Each size of clamp exerts a pressure of 5gm/mm2 when used on the largest vessel in its range, and 15gm/mm2 when used on the smallest vessel. Even at the higher range, S

Suture tying forcepsWith tip of 0.5 mm, 5 mm long tying platform,with stop to prevent too much pressure being applied. 10 cm total length No. 18025-10 origine catalogue FST